Bubble Bath Bomb Recipe

                   Bubble Bath Bomb Recipe

Ingredients:
combine the following 3 ingredients in a bowl and mix
1.25 cup baking soda
.5 cup tapioca starch
2 tbsp cream of tartar

In separate container heat up .5 tsp sodium lactate for 10 seconds

Add these next 3 ingredients to the sodium lactate and mix gently
4 tbsp decyl glucoside
2 tbsp coco betaine
fragrance

Directions:

Pour the wet ingredients into the bowl with the dry ingredients and mix well.
You should have a crumbly wet sand texture that sticks together.

Press mixture into bath bomb molds or other shape molds that have little to no details.   Allow to sit for a few days to completely dry.

Testing video was done when bombs were 5 days old.

Please note.. This recipe was printed and given freely for the sole purpose of FREE sharing.  Changing one or two ingredients and calling it your own original recipe is not cool!   Please do not do this and then put it up for sale.  Feel free to share this recipe with all.  No special permission is required...

Everyday Basic Bath Bomb Recipe

Everyday Basic Bath Bomb Recipe
(makes 6 or 7 - 4 ounce bombs depending on how you pack them)

Dry Ingredients: 

•   2 cups baking soda
•   1 cup powdered citric acid

•   1/2 cup powdered epsom salt

Wet Ingredients:
 
•   2 Tbsp light oil
•   2 tsp fragrance (be sure to check usage rate and adjust as needed)
•    liquid coloring (to your shade preference)

Instructions: 

  
1.  Sift your baking soda and Epsom salt into a mixing bowl and mix well.

 2.  Add your oil, color and fragrance to the dry ingredients and mix to incorporate all the wet ingredients evenly.   Make sure you are scraping the bottom and sides of the bowl.

3. Sift your citric acid into the mixing bowl  and mix it well.

Molding:
1. Molding is the fun part.   You can use the plastic ball ornaments found at hobby shops, metal ball molds from Xen, silicone baking molds, candy molds etc…   Loads of options.   I prefer to use the Xen metal molds in the 2 inch size for my standard bombs.

2. First thing to do is make sure you mix is ready for molding.   To test this you are going to grab a handful of the mix and squeeze.   If it clumps and stays clumped it is ready.   If it doesn’t stay clumped you will need to spritz it with some moisture to get it to a clumping state.   I like to use rubbing alcohol however you can also use witch hazel and water.  Be aware that water and witch hazel will activate the mix more than alcohol so you will spritz and mix, spritz and mix as quickly as you can so that you get as little of a reaction as possible.  Alcohol will also activate the mix but not nearly as quickly.

3.  Now your mix is ready.   Get your mold and pack them firm.   Not hard just firm.  If you are using the ball molds I suggest mounding the mix in both halves lightly and them firmly pressing them together.   Let it sit for 3 seconds and tap the mold with a spoon to release the seal and your bomb will pop right out.

4.  If you are using plastic decorative molds you will need to pack them in tightly and use the back of the spoon to smooth them out.   They don’t need to be perfect.   Let it sit for 30 seconds and flip the mold over.  If your bomb does not pop right out then give it a gentle tap with the spoon.   Keep in mind that the more detail the mold has the harder it will be to release from the mold.  (This is why I choose to use the round ball molds)

5.  Allow your bombs to air dry for 24 hour before packaging.  You do not want any moisture in them when you bag or jar them up or that moisture trapped in there will activate your bombs leaving a yucky mess.

Butter Butt Bath Melt Recipe

Butter Butt Bath Melt Recipe

 Version 1:
This will melt in your hand so handle them as little as possible
Dry Ingredients:
*7 ounces baking soda (depending on how thick you want it you can add more)
*1.5 ounce citric acid

Wet Ingredients:
*6 ounces Cocoa Butter
*1/2 ounce Shea Butter
OR
1/2 ounce coconut oil (solid at room temp 92 degree)
*1/4 oz polysorbate 80

****You can use any combination of softer butters totalling 1/2 ounce****

Version 2: will be a bit more solid but will still melt in your hand if you hold it to long

Dry Ingredients:
*7 ounces baking soda
*1.5 ounces citric acid

Wet Ingredients:
*6 ounces Cocoa Butter
*2 ounces soy wax (I prefer pillar blend)
 *1/2 ounce Shea Butter
OR
1/2 ounce coconut oil (solid at room temp 92 degree)
*1/4 oz polysorbate 80

****You can use any combination of softer butters totalling 1/2 ounce****


Optionals:
*Fragrance oil to recommended usage
*color to recommended usage
*If you do not have 92 degree coconut oil you can replace it with any similar weight butter
*preservative is not required for this recipe
*powdered oats or milk (use 1 Tbsp or to liking.  The more you add the less buttery it will become texture wise)
*botanicals to mix in or top with
*Clays are also a nice addition (remember less is more 1 tsp-1 tbsp)
*you can substitute the soy wax for Candelilla wax, Carnauba wax or beeswax.  You may have to adjust the amount used. Make sure it is a wax that will melt in the tub :)  High melt point waxes will just stay in clumps
*you can also substitute some of the baking soda for other dry ingredients like tapioca starch or corn starch.  Remember that starches feed yeast so... make sure you note this on your products.

Directions:
Step 1:  Pick your mold and have it ready to go.

Step 2: In a microwave safe bowl weigh out your cocoa butter and shea butter (soy wax if doing version 2).  Heat these 2(3) ingredients in the microwave in 30 second bursts until it is almost completely melted.   Remove from microwave and add your coconut oil and poly 80.  Don't worry about the coconut oil being solid.  It will melt from the heat of the other oils. 

Step 3:  While you are heating your butters, measure your baking soda and citric acid into a bowl.  Sift, blend well and set aside. This is the step where you will add any optional powders like botanicals, clays, oatmeal or milk.

Step 4:  Now go back to your oils and make sure it is all melted.  Stir it up to help any chunks that might still be floating.  If you need more heat only do it at 10 second intervals in the microwave.

Step 5: This is the fun step.  Add all your melted oil and butters into the dry ingredients and stir like crazy. Add in your liquid optionals like fragrance or liquid color.   Remember that as this cools it will start to solidify on you so you need to mix it in well.  This recipe gives you plenty of time for molding so take your time.  No need to rush.  Make sure when you fill your molds you are continuously stirring so that you are evenly distributing the powders that will want to sink to the bottom of your mixing container.

Step 6:  pop them in the freezer for 20 -30 minutes (depending on your mold size) to allow them to cool quickly.  Pop them out of the molds when they are solid.  If you have to press hard and they seem difficult to release then you need to leave them in the freezer a bit longer.  Even detailed molds should release very easily.

I do not recommend shipping these in hot temperatures.

NOTE OF CAUTION:  THIS WILL MAKE THE TUB A BIT SLIPPERY SO IF YOU ARE INTENDING TO GIVE THIS AS GIFTS OR FOR SALE YOU WILL NEED TO PUT A CAUTION STICKER ON YOUR PACKAGING.


FUN STUFF:

Option 1:  Make recipe as is for a nice plain jane bath melt full of buttery goodness.

Option 2: Make recipe as is but add 1/4 cup slsa for a foaming bath melt.

Option 3: Fill your molds with colored epsom salts or botanicals and pour your uncolored mixture into the mold making sure that all the butters get mixed in as you pour.  The mix is liquid enough that you should not have to worry much about mixing it in.

Option 4: Put some whole oatmeal in the mold and wait until the mixture thickens and scoop it into the mold so that the oatmeal stays on the top.  Some people have added a bit of honey to the mix.  If you add honey you will need to add a preservative.

Foaming Bath Bomber Recipe

I would like to thank the creator of this recipe.  It is actually a very good recipe and does wonderfully well with embeds to make it spin and color.



Now we all know that bath bombs are tricky little buggers.  Some have issues with humidity making them warty and soft while others have no issues at all with that sort of thing.  Thankfully I am one of the lucky ones and never have that problem.  Now that being said this recipe has a lot of options.  I will put them in parenthesis so you know my alterations and they will be marked with red ink.


Dry ingredients:
30oz baking soda
16oz citric acid
2oz SLSa (you can leave this out)
2.7oz cornstarch (tapioca starch and arrowroot powder both work)
.4 oz clay of choice (I prefer Kaolin in the white variety)
Add dry colorant here. (Lake dyes are what will give you the color blast. Straight dyes as well)
 
Wet ingredients:
2.6oz cocoa butter (2oz without SLSa) (You can also use coconut oil 93degree at 2.3 oz)
.7 oz polysorbate 80 (.5 without SLSa)THIS MAY BE LEFT OUT BUT IT IS WHAT KEEPS THE BUTTER FROM FLOATING ON THE WATER AND COLORS FROM STICKING TO YOUR TUB BUT IT IS NOT A NEEDED ITEM IF YOU DON'T WANT TO USE IT. REPLACE WITH OIL OF CHOICE.
1.3oz Fragrance of choice (1 oz without SLSa) (i generally go by smell rather than amount)
.4 oz witch Hazel


Directions:
While mixing in a stand mixer or with a electric hand mixer slowly pour in the wet ingredients. Add liquid colors at this point. (I find that hand mixing works just as well and less mess)
Mix well this is very Important
It may feel too dry, it's not just mold and go.

If your mix starts to not mold a few things can be done.
First try cleaning out your mold.  Sometimes the mix can get sticky in there.  Clean it well and try again.

If cleaning your mold does not work, spray your hand with witch Hazel and mix mix mix. (witch hazel assists in the hardness of the bomb but 90% or higher alcohol works as well)

Try again.

Hint when trying to mold round bombs BE SURE to have something metal to tap the top/bottom and lightly around the ring to help dislodge any air pockets that may cause the bomb to pull apart and not stay around coming out of the mold. If you try to unmold and it wont EASY , STOP!!! Tap again!!

Bath & Body Videos and Tutorials with recipes

The online bath & body community has so many wonderful things to offer.  Today I am going to share with you a few (or more) of my favorite youtube tutorials.   Grab ya some coffee or beverage of your choice and enjoy!

This video is such a great one to watch.   It is a technique called SBHP which I absolutely love.  Marlon Jiles did a wonderful job explaining the process.  Free tutorials are just as good as paid ones.   Give this a shot and save some money.

This is another of my favorites.   Bernadette Munguia did a wonderful job of showing us hot process soapmaking in a crock pot.   Beautiful show!

 

Wanna make bath bombs but don't have citric acid..  Well here is the solution to your problem.   Bath bombs made with cream of tartar instead.  Well done!

 

This video is a must watch for you bath bomb makers.  Lex Hart shows you how to make spinners and floaters.  She also includes her recipe.   Great video Lex!

 

To make things even better.  Here is the tutorial Lex created on how to make the embeds she talks about in the previous video :)

To further assist you in your embed making for bath bombs. The beautiful Miss Irene of Body Bonbon has shared her recipe and technique for making her version of embeds.  If you have ever seen her bath bombs you will definitely be pleased with this video.

 

Just a little sample of Irene's work.   Be sure to watch all her amazing videos.  You will be happy you did when you see all the color shows.

 

This bubble bar video is compliments of Bonnie from Good Earth Spa.  She includes her recipe as well (I have provided it below as well) as a bubble test at the end of the video.  She also shows you how she makes her rolls.

 Recipe:

• 1/3 Cup Cornstarch
• 1/3 Cup Cream of Tartar
• 1 Cup Baking Soda
• 1 Cup- 1 1/2 Cups SLSA (Sodium lauryl sulfoacetate)
• 1 Tablespoon Tapioca Starch
• 1/3 Cup - 1/2 cup Vegetable Glycerine
• 1 Tablespoon Moisturizing Oil
• 2 teaspoons, more or less Fragrance or Essential Oil
• Colorant of your choice.

****   Lana's personal note:  Try to use the least amount of glycerin as you can.  The less you use the faster it will dry**********

Okay..  so now that you have watched some videos..  you can use the recipes I have shared in previous posts or you can use the ones provided in the videos to create fantastic gifts for your friends and family.  All of these can be made and ready in time for Christmas.   Who doesn't love usable presents :)

Lana's Bubble Bath Dough Recipe

So here is a little freebie for you.   I have created a single use bubble dough recipe to share with you.  This is the one I mentioned in the previous bubble dough post.  This was a happy little accident when I was creating a different recipe and I was quite surprised at the results.    This is a single use item and it is not recommended to be reused.

Lana's Bubble Bath Dough

Ingredients:

2 cups Cornstarch (have an extra ¼ cup ready in case you need it)

3/4 cup slsa

1/2 cup (120 ml)  jojoba oil

1/3 cup (80 ml) Cocamidopropyl Betaine (or secondary of your choice)

1/4 (60 ml) cup glycerin

2 tbsp jojoba beads (optional)

Fragrance at manufacturers recommendations (I used the highest allowed)

Liquid color to your liking.  If you use powdered you may need to add a bit more of a liquid.  I recommend increasing the betaine.

Preservative as recommended at the rate of manufacturers recommendations.   This product will be used around water therefore to protect the safety of all it should be used.

Directions:

Measure out your dry ingredients into a bowl (except your jojoba beads). I find a stainless bowl makes mixing much easier. 

Gently mix then to distribute evenly.  

Measure out your liquid ingredients into a bowl (including fragrance and preservative) and mix to distribute them evenly. 

Now combine your wet ingredients into your dry and mix well.   Knead it until you get a non sticky dough texture.  If you find the dough is to sticky then add small amounts of cornstarch at a time.. You should not have to add more than a tbsp.

Once mixed add your jojoba beads and blend well or leave without additives.

Package and enjoy.

*** On a side note, this makes an amazing shaving dough.  My legs get super smooth and no nicks.   that is a BONUS***

Slsa free Bubble Bar recipe

 Slsa Free Bubble Bar Recipe

 This is a recipe that I created for those of you that do not want to create a bubble bar using slsa.   This is a great alternative for someone with allergies to the powdered surfactants (the stuff that makes it bubble).   Give this a go and see what you think.   There is also a demo of the bubble show on my youtube channel.

2 cup Baking Soda
1/2 cup Tapioca Starch
4 Tbsp Cream of Tartar
2 Tbsp Citric Acid
3 Tbsp Coco Betaine
1.5 Tbsp Decyl Glucoside
2 tsp Sodium Lactate (Liquid)
1 tsp fragrance or to liking (remember the more you add, the more you will need to work it in)
color to taste
1 tbsp (optional) glycerin

**Please Note**
This recipe is a very tricky recipe and will require patience.  Due to the ingredient combination, it is not going to be the normal consistency you will be used to if you use a recipe with glycerin.  You are going to be tempted at certain points to add more ingredients.. Don't do it...  Resist the urge until right before you roll.   Then you can use the optional tbsp of glycerin if you feel you need it but it will make it a bit stickier to roll.

Have your paper ready with a bit of baking soda or tapioca starch on it to help with the sticking.  I keep a smidge of it on the side just in case I need it.  You will need to move fast once you stop mixing.

Mix all your powder ingredients together completely and then add your liquids mixing as you go.

You will notice that your batter is very airy, fluffy and sticky.  No worries..  Keep working it with your hand.  After you have completely blended it together and it is no longer fluffy scrape your gloves and let your mix sit for 5 minutes so that it can rise.   You will notice it has a crust on it..  That is fine and nothing to worry about.  Beat it down and mix some more. 

When you feel the mix getting thicker and more doughish, seperate into your colors and work fast.   If you feel it is getting crumbly add a spritz or 2 of water.  But don't over do it.  It will get very sticky again.  If it does just let it sit again for a few minutes and remix it.

Now comes the fun part.   Plop your first color and make a large flat rectangle.   Take your second color and do the same only on top of the first layer.   I find it is easier to crumble it on top evenly then lightly smoosh it so it doesn't distort the bottom color.  Once you have this squared you can roll it into a jelly roll.   If it sticks to your paper just scrape it up and keep rolling.  

This dough will continue to try and raise which is what you want.  Airy and light.  More like a famous bar we all know.  Don't be tempted to pack it down unless you want a more compact bar like the ones with large amounts of glycerin.   You will also notice that the outside of the roll wants to crack..  That is okay too.  Just lightly with a finger press it down.  I find using a finger dipped in baking soda works best.

Now for the cutting..  Generally you will see that these are dried sitting the same way they are cut.  We are not going to do that.  These will get fluffier as they sit and the sides will buldge out if you do that.  So we are going to lay them on their sides.    You can reshape them into squares or circles at this point.   Once you are happy with how they look leave them sit.  Do not be tempted to play with them.   After 3 hours you will notice that you can pick them up and flip them if you like.   They should be completely dry within 12 hours.  If not just leave them for a bit longer.

Lana's Bubble Bar 11 free recipe

This darling recipe was formulated by myself.   i spend a bit of time creating a bar that was fast drying and loaded with bubbles... I am in love...   If you subscribe to my youtube channel you can see a demo of me making these as well as how they perform in the tub.

                   Lana's Bubble Bar 11

 Ingredients:
250 g  Baking soda
70 g SLSA powder
65 g Cream of Tartar
60 g Lauramidopropyl Betaine
Fragrance or essential oil
color

optional 1 tsp of glycerin if needed for rolling..  Do not add if humidity is high.
*****************************************************************

Sift and mix all powdered ingredients into a metal bowl.  Add liquid ingredients and fragrance and mix well.

Separate into balls for coloring.

Spread first color onto parchment paper forming a rectangle.  Add each color and pat down on top of the first.  When all your colors are added, use another piece of parchment paper and roll to desired thickness.  

Square edges and use the paper to help roll your dough into a jelly roll.  Pack in the sides.  Don't worry about cracks..   Smooth them out with your paper by gently rubbing the paper across the top of the roll.    Cut into bars and let dry.    These are fast drying.  You will notice the firmness within hours..

Completely dry in 10 hours


Substitutions:
60 g cocamidapropyl Betaine in place of the lauramidopropyl betaine-  dough rises and foams when mixing.  You may find that you need to add 1 tbsp of glycerin to the mix to make it less "dry" feeling.   Dough is slightly harder to roll without the added glycerin.  Slices tend to be less compact and more "airy".   Starts showing signs of hardening within the same time frame as above.   End result is not quite as hard and breaks easier.   Also gives great bubbles but not quite as much as  the L-Betaine.

Color tab embeds Dupe Recipe

Now aren't these the coolest things?   Drop one or 2 in the bathtub and get an ocean of color.   another cool thing is that these can be put into bath bombs for a huge color explosion.   My friend Irene from Body Bonbon makes the coolest bath bombs ever including ones made from a cookie cutter as a mold..     Check out her youtube channel to see all her demos.   It really is fantastic.

Anyway..   I make standard boring bath bombs and wanted to figure out how she was doing it.  I did a quick search and found some really great information.   I decided to dupe another recipe and well.... I love them.   I am sharing this recipe.  It is based on the ingredients listed with a few minor changes.

 

Inspired by
Na*kedHBP's "Color Tab Recipe"
Body BonBons youtube tutorial
and
Lex Harts youtube tutorial

Have you ever wondered how people who make bath bombs get the really cool colors to shoot out of the bomb as it floats around the tub?   Well let me help you out.  They use colored inserts made a bit faster fizzing with loads of dye and put those inside the standard bath bombs.   When this hits the water it will begin to dissolve and when it hits the embeds they will fizz faster than the normal bomb creating a spinning bomb that shoots out color.  That is all there is to it.   Easy Peasy...   Now get to work and get creative.

Dry Ingredients:

•     1 Cup Baking Soda                                                                   
•     1 Cup Citric Acid

Wet Ingredients:

• Your choice of alcohol, witch hazel or water for spraying (I prefer alcohol)

Optional Ingredients:

•     1 Tbsp Kaolin Clay or Cream of Tartar (optional ingredient that gives little benefit for the amount used per batch other than it is said to help with hardening)
•     1 tsp Colorant of choice (I like to do one color at a time)  
•     1/2 TBSP Polysorbate 80 (optional to assist in emulsifying the oil in the bathtub so it isn't all floating on the top as well as to keep your dyes from sticking to the tub)
•     1 Tbsp oil of choice ( I prefer jojoba oil or monoi oil)    
•     fragrance

Fragrance oil is optional with these.. If you know you are going to be using these in a specific bath bomb then adding fragrance to them would be a good thing.... but... if you are making these in bulk then leaving them unscented might be your better option.
Measure out all of your dry ingredients EXCEPT the citric acid.   Mix them in a bowl and blend them well.  If you are using a powder color this is when you would add it.
Measure out all your liquid ingredients into a mixing cup and blend well.  If you are using a liquid color this is when you would add it.

Slowly mix your wet ingredients into your dry ingredients.  You do not have to worry about fizzing action because you have not added your citric acid yet.   Blend it well until everything is incorporated well.

Measure out your citric acid and add it to the mix.   You will notice less fizzing reaction if any.  Blend this well..  and then blend more.

Take your spray bottle and give the mix a few squirts.  I like using high grain alcohol so that it doesn’t have the reaction that water does.  However you can use any of the choices above.   You want your mix to be like wet sand.   Not damp sand but wet sand where when you squeeze it in your hand it sticks together.

Now is the time to mold.   Take the mold of your choice.. I like using a metal measuring tsp for these but I have also used a ½ tsp too.  Just depends on what you like.  Now scoop your mix into the mold and press firmly with your thumb to pack it in.   Release the mix and set it on a paper lined cookie sheet or paper to dry.  You will not want to move these around much.   Keep molding until you have it complete.  

ENJOY!!

Dupe of Bubble Bath Dough/Putty

  

Here is my version based on several recipes.  Please note that this is not the EXACT recipe of any of these brands. This is the recipe I used before creating my own recipe which I will share in a future post.

Bubble Bath Dough Putty

Inspired by:

Lush's "Fun" Recipe
Atomic Balm's " Tub-time bubble bath play-dough"
 Na*kedHBP’s “Original Bath Putty Recipe”
And
Body bonbon's "Extended Playtime Bubbling Bath Dough"

This Bath Putty is basically a soap and bubble bath in one product.   The kids can mold it, squish it, use it as soap and so much more.  This putty will completely dissolve in the water and as it dissolves.

 This putty is not reusable and is intended as a single use product.  1.5 ounces is the recommended single use portion.  One day I might come up with a reusable one but so far the only two that I have seen are by the FANTASTIC Miss Irene from Body Bonbon and the other is by the Incredible Miss Tammy from Atomic Balm Bath and Body

Ingredients:

227 g Tapioca Starch or Corn Starch  (corn starch has a better consistency)
142g  Lauramidopropyl Betaine  
43g Castor Oil
28g Glycerin
17g Decyl Glucoside  
5 mL Fragrance oil
1.2 mL Optiphen plus
color of your choice

 Measure out your cornstarch and pour it into your mixing bowl.  If you are using a powdered color add it in now with the corn starch.  Give it a good mixing to incorporate it into the mix.  Set the bowl aside for later use.

Measure the wet ingredients into a measuring cup. Mix all your wet ingredients together so that they are evenly distributed.   This includes your fragrance and your preservative.   If you are using a liquid colorant you will add that now too. 
  

Get your bowl of dry ingredients and slowly pour your wet ingredients into it.   Mix this together well.  Knead it like bread dough.  Keep mixing and kneading until you have a well formed dough.       

If your dough feels to sticky add a little pinch or 2 of cornstarch.   Keep adding little amounts to get the desired consistency.  You want this to be like a soft clay.   If your dough is to dry just add a small dash of the lauramidopropyl betaine or the decyl glucoside.   Remember to always add extra ingredients in very small amounts.   You can always add more but you can never take away.

Packaging.   This is always every ones favorite part.   I like to use 1.5 ounce portions.   You can find all kinds of packaging ideas on google… I personally like to use little 2 ounce containers from the dollar store.   Make up 4 different colors and stack the containers inside of a tube gift bag and tie with a bow.   The perfect gift for a child.  Heck. even us adults love fun things too.

Now stop paying for a dough product and get creative..   Make some :)